Windows disk imaging software which can save drivers and boot sector separately during backup? ...
Would a completely good Muggle be able to use a wand?
Would this house-rule that treats advantage as a +1 to the roll instead (and disadvantage as -1) and allows them to stack be balanced?
calculus parametric curve length
What happens if you roll doubles 3 times then land on "Go to jail?"
Why do we use the plural of movies in this phrase "We went to the movies last night."?
Why do professional authors make "consistency" mistakes? And how to avoid them?
What connection does MS Office have to Netscape Navigator?
Written every which way
Non-deterministic sum of floats
Is it ever safe to open a suspicious html file (e.g. email attachment)?
How do I go from 300 unfinished/half written blog posts, to published posts?
Is micro rebar a better way to reinforce concrete than rebar?
Why do remote companies require working in the US?
Do I need to enable Dev Hub in my PROD Org?
What's the best way to handle refactoring a big file?
Inappropriate reference requests from Journal reviewers
What is the purpose of the Evocation wizard's Potent Cantrip feature?
Unreliable Magic - Is it worth it?
How do I transpose the 1st and -1th levels of an arbitrarily nested array?
What is the result of assigning to std::vector<T>::begin()?
Is there an analogue of projective spaces for proper schemes?
Can you replace a racial trait cantrip when leveling up?
Is there a difference between "Fahrstuhl" and "Aufzug"
Is there a way to save my career from absolute disaster?
Windows disk imaging software which can save drivers and boot sector separately during backup?
The Next CEO of Stack OverflowSecond partition with Windows 7 unmountableProblems with Windows 7 and HDWindows 7 clean install becomes corrupt after reboot (repeated many fresh installs)How to resolve error 0xc000000eWindows 7: Boot selection failed because a required device is inaccessibleWindows 7 does not Boot after removing UbuntuRepairing the windows boot sector and/or master boot record (MBR) of Windows XP using Windows 7 commandsHow to fix bcd errorWindows 7 not bootingBroken partition causing Windows to be unable to find the boot files?
I tried cloning an SSD from one laptop to a similar laptop. The laptop is running Windows 7 Enterprise. The second laptop has a larger and different model SSD. Both laptops have only a single drive, not USB devices attached. After the restore, the laptop doesn't boot.
I get an error "...Status: 0xc000000f Info: The best selection failed because a required device is inaccessible".
Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause.
To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "repair your computer."
If you don't have this disc, contact your system administrator or computer
manufacturer for assistance.
Status: 0xc000000f
Info: The boot selection failed because a required device is inaccessible.
I used True Image 2014 and the Windows built-in system imaging option and they both gave the same error after restoring. I did the Windows repair option and it said it couldn't fix the problem. I used bootsect.exe to write the MBR. Used bcdedit.exe and it doesn't show any 'unknown' devices. I am not sure why Windows laptop is not booting properly.
This is what I want to try doing. Install Windows 7 from scratch. Then install a disk imaging software that has the capability to save the MBR and drivers and anything that is specific to the SSD. Then I want to restore the image to the SSD where it loads the stuff saved earlier during the backup. Yes it will write and wipe the Windows 7 installation. I am thinking the restore needs some help in installing stuff which make Windows work with this specific SSD. The SSD installation disk doesn't have any drives. It's a Samsung EVO drive.
Any ideas if there's such imaging software or if someone has a better idea? I am going to try Paragon Disk Manager, Norton Ghost and DiskProtect and see if I have better success with these.
windows-7 ssd restore windows-backup imaging
edited 2 hours ago
karel
9,34493239
asked Dec 8 '13 at 8:55
Tony_HenrichTony_Henrich
4,6532574100
add a comment |
I tried cloning an SSD from one laptop to a similar laptop. The laptop is running Windows 7 Enterprise. The second laptop has a larger and different model SSD. Both laptops have only a single drive, not USB devices attached. After the restore, the laptop doesn't boot.
I get an error "...Status: 0xc000000f Info: The best selection failed because a required device is inaccessible".
Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause.
To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "repair your computer."
If you don't have this disc, contact your system administrator or computer
manufacturer for assistance.
Status: 0xc000000f
Info: The boot selection failed because a required device is inaccessible.
I used True Image 2014 and the Windows built-in system imaging option and they both gave the same error after restoring. I did the Windows repair option and it said it couldn't fix the problem. I used bootsect.exe to write the MBR. Used bcdedit.exe and it doesn't show any 'unknown' devices. I am not sure why Windows laptop is not booting properly.
This is what I want to try doing. Install Windows 7 from scratch. Then install a disk imaging software that has the capability to save the MBR and drivers and anything that is specific to the SSD. Then I want to restore the image to the SSD where it loads the stuff saved earlier during the backup. Yes it will write and wipe the Windows 7 installation. I am thinking the restore needs some help in installing stuff which make Windows work with this specific SSD. The SSD installation disk doesn't have any drives. It's a Samsung EVO drive.
Any ideas if there's such imaging software or if someone has a better idea? I am going to try Paragon Disk Manager, Norton Ghost and DiskProtect and see if I have better success with these.
windows-7 ssd restore windows-backup imaging
edited 2 hours ago
karel
9,34493239
asked Dec 8 '13 at 8:55
Tony_HenrichTony_Henrich
4,6532574100
Did you get the regular Acronis or did you get the universal driver tool also?
– cybernard
Dec 8 '13 at 18:20
Do you mean Universal Restore? I don't see anything about universal driver tool on their site. I used universal restore. At the end of the restore there's an option to load drivers. I didn't have a cd ready.
– Tony_Henrich
Dec 8 '13 at 19:33
In the 2014 flavor it is called 2014 Premium.
– cybernard
Dec 8 '13 at 22:09
I have 2014 Premium. Which tool are you talking about?
– Tony_Henrich
Dec 9 '13 at 4:27
add a comment |
I tried cloning an SSD from one laptop to a similar laptop. The laptop is running Windows 7 Enterprise. The second laptop has a larger and different model SSD. Both laptops have only a single drive, not USB devices attached. After the restore, the laptop doesn't boot.
I get an error "...Status: 0xc000000f Info: The best selection failed because a required device is inaccessible".
Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause.
To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "repair your computer."
If you don't have this disc, contact your system administrator or computer
manufacturer for assistance.
Status: 0xc000000f
Info: The boot selection failed because a required device is inaccessible.
I used True Image 2014 and the Windows built-in system imaging option and they both gave the same error after restoring. I did the Windows repair option and it said it couldn't fix the problem. I used bootsect.exe to write the MBR. Used bcdedit.exe and it doesn't show any 'unknown' devices. I am not sure why Windows laptop is not booting properly.
This is what I want to try doing. Install Windows 7 from scratch. Then install a disk imaging software that has the capability to save the MBR and drivers and anything that is specific to the SSD. Then I want to restore the image to the SSD where it loads the stuff saved earlier during the backup. Yes it will write and wipe the Windows 7 installation. I am thinking the restore needs some help in installing stuff which make Windows work with this specific SSD. The SSD installation disk doesn't have any drives. It's a Samsung EVO drive.
Any ideas if there's such imaging software or if someone has a better idea? I am going to try Paragon Disk Manager, Norton Ghost and DiskProtect and see if I have better success with these.
windows-7 ssd restore windows-backup imaging
edited 2 hours ago
karel
9,34493239
asked Dec 8 '13 at 8:55
Tony_HenrichTony_Henrich
4,6532574100
I tried cloning an SSD from one laptop to a similar laptop. The laptop is running Windows 7 Enterprise. The second laptop has a larger and different model SSD. Both laptops have only a single drive, not USB devices attached. After the restore, the laptop doesn't boot.
I get an error "...Status: 0xc000000f Info: The best selection failed because a required device is inaccessible".
Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause.
To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "repair your computer."
If you don't have this disc, contact your system administrator or computer
manufacturer for assistance.
Status: 0xc000000f
Info: The boot selection failed because a required device is inaccessible.
I used True Image 2014 and the Windows built-in system imaging option and they both gave the same error after restoring. I did the Windows repair option and it said it couldn't fix the problem. I used bootsect.exe to write the MBR. Used bcdedit.exe and it doesn't show any 'unknown' devices. I am not sure why Windows laptop is not booting properly.
This is what I want to try doing. Install Windows 7 from scratch. Then install a disk imaging software that has the capability to save the MBR and drivers and anything that is specific to the SSD. Then I want to restore the image to the SSD where it loads the stuff saved earlier during the backup. Yes it will write and wipe the Windows 7 installation. I am thinking the restore needs some help in installing stuff which make Windows work with this specific SSD. The SSD installation disk doesn't have any drives. It's a Samsung EVO drive.
Any ideas if there's such imaging software or if someone has a better idea? I am going to try Paragon Disk Manager, Norton Ghost and DiskProtect and see if I have better success with these.
windows-7 ssd restore windows-backup imaging
windows-7 ssd restore windows-backup imaging
edited 2 hours ago
karel
9,34493239
asked Dec 8 '13 at 8:55
Tony_HenrichTony_Henrich
4,6532574100
edited 2 hours ago
karel
9,34493239
asked Dec 8 '13 at 8:55
Tony_HenrichTony_Henrich
4,6532574100
edited 2 hours ago
karel
9,34493239
edited 2 hours ago
karel
9,34493239
edited 2 hours ago
karel
9,34493239
9,34493239
asked Dec 8 '13 at 8:55
Tony_HenrichTony_Henrich
4,6532574100
asked Dec 8 '13 at 8:55
Tony_HenrichTony_Henrich
4,6532574100
asked Dec 8 '13 at 8:55
Tony_HenrichTony_Henrich
4,6532574100
4,6532574100
Did you get the regular Acronis or did you get the universal driver tool also?
– cybernard
Dec 8 '13 at 18:20
Do you mean Universal Restore? I don't see anything about universal driver tool on their site. I used universal restore. At the end of the restore there's an option to load drivers. I didn't have a cd ready.
– Tony_Henrich
Dec 8 '13 at 19:33
In the 2014 flavor it is called 2014 Premium.
– cybernard
Dec 8 '13 at 22:09
I have 2014 Premium. Which tool are you talking about?
– Tony_Henrich
Dec 9 '13 at 4:27
add a comment |
Did you get the regular Acronis or did you get the universal driver tool also?
– cybernard
Dec 8 '13 at 18:20
Do you mean Universal Restore? I don't see anything about universal driver tool on their site. I used universal restore. At the end of the restore there's an option to load drivers. I didn't have a cd ready.
– Tony_Henrich
Dec 8 '13 at 19:33
In the 2014 flavor it is called 2014 Premium.
– cybernard
Dec 8 '13 at 22:09
I have 2014 Premium. Which tool are you talking about?
– Tony_Henrich
Dec 9 '13 at 4:27
Did you get the regular Acronis or did you get the universal driver tool also?
– cybernard
Dec 8 '13 at 18:20
Did you get the regular Acronis or did you get the universal driver tool also?
– cybernard
Dec 8 '13 at 18:20
Do you mean Universal Restore? I don't see anything about universal driver tool on their site. I used universal restore. At the end of the restore there's an option to load drivers. I didn't have a cd ready.
– Tony_Henrich
Dec 8 '13 at 19:33
Do you mean Universal Restore? I don't see anything about universal driver tool on their site. I used universal restore. At the end of the restore there's an option to load drivers. I didn't have a cd ready.
– Tony_Henrich
Dec 8 '13 at 19:33
In the 2014 flavor it is called 2014 Premium.
– cybernard
Dec 8 '13 at 22:09
In the 2014 flavor it is called 2014 Premium.
– cybernard
Dec 8 '13 at 22:09
I have 2014 Premium. Which tool are you talking about?
– Tony_Henrich
Dec 9 '13 at 4:27
I have 2014 Premium. Which tool are you talking about?
– Tony_Henrich
Dec 9 '13 at 4:27
add a comment |
2 Answers
2
active
oldest
votes
Unfortunately, similar is not the same. You need to inject all the drivers for the other laptop into the source laptop. Especially, the chipset and SATA/AHCI drivers.
create a c:drivers folder
copy the extract drivers into said folder
pnputil.exe -a c:drivers*.inf -> Add all packages in c:drivers
When the process is complete you may delete c:drivers if you want to save space.
Clone the source to the destination with any software you want.
answered Dec 8 '13 at 18:27
cybernardcybernard
10.5k31628
Copy what extract drivers? Am I copying some inf files manually into the drivers folder? pnputil.exe -a c:drivers*.inf gives an error ".. invalid INF passed as parameter"
– Tony_Henrich
Dec 9 '13 at 7:05
Download the chipset and SATA drivers and extract them into c:drivers Then run the command.
– cybernard
Dec 10 '13 at 0:19
add a comment |
During the last stage, true Image universal restore was asking for a driver for ven_8086&dev_1E03&SUBSYS_176B103C&REV_04. It didn't make sense for me so I told it to ignore it. It turns out it's the driver for the SATA AHCI Controller and without it Windows can't boot. I downloaded the driver from the laptop's manufacturer web site and when that prompt came back, it loaded the driver and the system booted. (Note: I installed a fresh copy of Windows on the second laptop and used a tool DoubleDriver to copy all the drivers to the USB drive for Universal Restore to use for the TI restore, for some reason it didn't use the AHCI driver so I got the one from the website.)
answered Dec 10 '13 at 0:16
Tony_HenrichTony_Henrich
4,6532574100
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f685488%2fwindows-disk-imaging-software-which-can-save-drivers-and-boot-sector-separately%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
Unfortunately, similar is not the same. You need to inject all the drivers for the other laptop into the source laptop. Especially, the chipset and SATA/AHCI drivers.
create a c:drivers folder
copy the extract drivers into said folder
pnputil.exe -a c:drivers*.inf -> Add all packages in c:drivers
When the process is complete you may delete c:drivers if you want to save space.
Clone the source to the destination with any software you want.
answered Dec 8 '13 at 18:27
cybernardcybernard
10.5k31628
Copy what extract drivers? Am I copying some inf files manually into the drivers folder? pnputil.exe -a c:drivers*.inf gives an error ".. invalid INF passed as parameter"
– Tony_Henrich
Dec 9 '13 at 7:05
Download the chipset and SATA drivers and extract them into c:drivers Then run the command.
– cybernard
Dec 10 '13 at 0:19
add a comment |
Unfortunately, similar is not the same. You need to inject all the drivers for the other laptop into the source laptop. Especially, the chipset and SATA/AHCI drivers.
create a c:drivers folder
copy the extract drivers into said folder
pnputil.exe -a c:drivers*.inf -> Add all packages in c:drivers
When the process is complete you may delete c:drivers if you want to save space.
Clone the source to the destination with any software you want.
answered Dec 8 '13 at 18:27
cybernardcybernard
10.5k31628
Copy what extract drivers? Am I copying some inf files manually into the drivers folder? pnputil.exe -a c:drivers*.inf gives an error ".. invalid INF passed as parameter"
– Tony_Henrich
Dec 9 '13 at 7:05
Download the chipset and SATA drivers and extract them into c:drivers Then run the command.
– cybernard
Dec 10 '13 at 0:19
add a comment |
Unfortunately, similar is not the same. You need to inject all the drivers for the other laptop into the source laptop. Especially, the chipset and SATA/AHCI drivers.
create a c:drivers folder
copy the extract drivers into said folder
pnputil.exe -a c:drivers*.inf -> Add all packages in c:drivers
When the process is complete you may delete c:drivers if you want to save space.
Clone the source to the destination with any software you want.
answered Dec 8 '13 at 18:27
cybernardcybernard
10.5k31628
Unfortunately, similar is not the same. You need to inject all the drivers for the other laptop into the source laptop. Especially, the chipset and SATA/AHCI drivers.
create a c:drivers folder
copy the extract drivers into said folder
pnputil.exe -a c:drivers*.inf -> Add all packages in c:drivers
When the process is complete you may delete c:drivers if you want to save space.
Clone the source to the destination with any software you want.
answered Dec 8 '13 at 18:27
cybernardcybernard
10.5k31628
edited Dec 8 '13 at 22:10
answered Dec 8 '13 at 18:27
cybernardcybernard
10.5k31628
answered Dec 8 '13 at 18:27
cybernardcybernard
10.5k31628
answered Dec 8 '13 at 18:27
cybernardcybernard
10.5k31628
10.5k31628
Copy what extract drivers? Am I copying some inf files manually into the drivers folder? pnputil.exe -a c:drivers*.inf gives an error ".. invalid INF passed as parameter"
– Tony_Henrich
Dec 9 '13 at 7:05
Download the chipset and SATA drivers and extract them into c:drivers Then run the command.
– cybernard
Dec 10 '13 at 0:19
add a comment |
Copy what extract drivers? Am I copying some inf files manually into the drivers folder? pnputil.exe -a c:drivers*.inf gives an error ".. invalid INF passed as parameter"
– Tony_Henrich
Dec 9 '13 at 7:05
Download the chipset and SATA drivers and extract them into c:drivers Then run the command.
– cybernard
Dec 10 '13 at 0:19
Copy what extract drivers? Am I copying some inf files manually into the drivers folder? pnputil.exe -a c:drivers*.inf gives an error ".. invalid INF passed as parameter"
– Tony_Henrich
Dec 9 '13 at 7:05
Copy what extract drivers? Am I copying some inf files manually into the drivers folder? pnputil.exe -a c:drivers*.inf gives an error ".. invalid INF passed as parameter"
– Tony_Henrich
Dec 9 '13 at 7:05
Download the chipset and SATA drivers and extract them into c:drivers Then run the command.
– cybernard
Dec 10 '13 at 0:19
Download the chipset and SATA drivers and extract them into c:drivers Then run the command.
– cybernard
Dec 10 '13 at 0:19
add a comment |
During the last stage, true Image universal restore was asking for a driver for ven_8086&dev_1E03&SUBSYS_176B103C&REV_04. It didn't make sense for me so I told it to ignore it. It turns out it's the driver for the SATA AHCI Controller and without it Windows can't boot. I downloaded the driver from the laptop's manufacturer web site and when that prompt came back, it loaded the driver and the system booted. (Note: I installed a fresh copy of Windows on the second laptop and used a tool DoubleDriver to copy all the drivers to the USB drive for Universal Restore to use for the TI restore, for some reason it didn't use the AHCI driver so I got the one from the website.)
answered Dec 10 '13 at 0:16
Tony_HenrichTony_Henrich
4,6532574100
add a comment |
During the last stage, true Image universal restore was asking for a driver for ven_8086&dev_1E03&SUBSYS_176B103C&REV_04. It didn't make sense for me so I told it to ignore it. It turns out it's the driver for the SATA AHCI Controller and without it Windows can't boot. I downloaded the driver from the laptop's manufacturer web site and when that prompt came back, it loaded the driver and the system booted. (Note: I installed a fresh copy of Windows on the second laptop and used a tool DoubleDriver to copy all the drivers to the USB drive for Universal Restore to use for the TI restore, for some reason it didn't use the AHCI driver so I got the one from the website.)
answered Dec 10 '13 at 0:16
Tony_HenrichTony_Henrich
4,6532574100
add a comment |
During the last stage, true Image universal restore was asking for a driver for ven_8086&dev_1E03&SUBSYS_176B103C&REV_04. It didn't make sense for me so I told it to ignore it. It turns out it's the driver for the SATA AHCI Controller and without it Windows can't boot. I downloaded the driver from the laptop's manufacturer web site and when that prompt came back, it loaded the driver and the system booted. (Note: I installed a fresh copy of Windows on the second laptop and used a tool DoubleDriver to copy all the drivers to the USB drive for Universal Restore to use for the TI restore, for some reason it didn't use the AHCI driver so I got the one from the website.)
answered Dec 10 '13 at 0:16
Tony_HenrichTony_Henrich
4,6532574100
During the last stage, true Image universal restore was asking for a driver for ven_8086&dev_1E03&SUBSYS_176B103C&REV_04. It didn't make sense for me so I told it to ignore it. It turns out it's the driver for the SATA AHCI Controller and without it Windows can't boot. I downloaded the driver from the laptop's manufacturer web site and when that prompt came back, it loaded the driver and the system booted. (Note: I installed a fresh copy of Windows on the second laptop and used a tool DoubleDriver to copy all the drivers to the USB drive for Universal Restore to use for the TI restore, for some reason it didn't use the AHCI driver so I got the one from the website.)
answered Dec 10 '13 at 0:16
Tony_HenrichTony_Henrich
4,6532574100
answered Dec 10 '13 at 0:16
Tony_HenrichTony_Henrich
4,6532574100
answered Dec 10 '13 at 0:16
Tony_HenrichTony_Henrich
4,6532574100
answered Dec 10 '13 at 0:16
Tony_HenrichTony_Henrich
4,6532574100
4,6532574100
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f685488%2fwindows-disk-imaging-software-which-can-save-drivers-and-boot-sector-separately%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Did you get the regular Acronis or did you get the universal driver tool also?
– cybernard
Dec 8 '13 at 18:20
Do you mean Universal Restore? I don't see anything about universal driver tool on their site. I used universal restore. At the end of the restore there's an option to load drivers. I didn't have a cd ready.
– Tony_Henrich
Dec 8 '13 at 19:33
In the 2014 flavor it is called 2014 Premium.
– cybernard
Dec 8 '13 at 22:09
I have 2014 Premium. Which tool are you talking about?
– Tony_Henrich
Dec 9 '13 at 4:27