Linksys E2500 works as access pointHow do I configure my Linksys WRT160N to be a wireless access point?Can...
When does coming up with an idea constitute sufficient contribution for authorship?
Proof by Induction - New to proofs
What are these green text/line displays shown during the livestream of Crew Dragon's approach to dock with the ISS?
How to properly claim credit for peer review?
Word to be used for "standing with your toes pointing out"
How to add multiple differently colored borders around a node?
How can I mix up weapons for large groups of similar monsters/characters?
For Loop and Sum
LTSpice: When running a linear AC simulation, how to view the voltage ratio between two voltages?
How to push a box with physics engine by another object?
Wanted: 5.25 floppy to usb adapter
How to satisfy a player character's curiosity about another player character?
Eww, those bytes are gross
I am on the US no-fly list. What can I do in order to be allowed on flights which go through US airspace?
Does Windows 10's telemetry include sending *.doc files if Word crashed?
Am I using the wrong word all along?
Dilemma of explaining to interviewer that he is the reason for declining second interview
Is the theory of the category of topological spaces computable?
Can I become debt free or should I file for bankruptcy? How do I manage my debt and finances?
Can I retract my name from an already published manuscript?
raspberry pi change directory (cd) command not working with USB drive
Could be quantum mechanics necessary to analyze some biology scenarios?
Can the Count of Monte Cristo's calculation of poison dosage be explained?
Why didn't Eru and/or the Valar intervene when Sauron corrupted Númenor?
Linksys E2500 works as access point
How do I configure my Linksys WRT160N to be a wireless access point?Can every wireless broadband router be used as an access point?How do I access my wireless access point via browser?connecting to access pointLinksys E2500 - Terrible WiFi speedAccessing router access point with dynamic IPConfiguring a Wired Access Point - Linksys WRT54GWireless routers as Access point using LAN-LAN but no connectivity through other LAN ports, and wifi worksCan't get Internet connectivity from access point connected to Zyxel firewallUsing DIR-842 as an access point
I have 2 wireless routers: a Belkin ADSL router where I receive the internet from ISP via cable, and a Linksys E2500. Is there any way that I can make the Linksys router an access point? Or something like that?
wireless-router wireless-access-point
add a comment |
I have 2 wireless routers: a Belkin ADSL router where I receive the internet from ISP via cable, and a Linksys E2500. Is there any way that I can make the Linksys router an access point? Or something like that?
wireless-router wireless-access-point
add a comment |
I have 2 wireless routers: a Belkin ADSL router where I receive the internet from ISP via cable, and a Linksys E2500. Is there any way that I can make the Linksys router an access point? Or something like that?
wireless-router wireless-access-point
I have 2 wireless routers: a Belkin ADSL router where I receive the internet from ISP via cable, and a Linksys E2500. Is there any way that I can make the Linksys router an access point? Or something like that?
wireless-router wireless-access-point
wireless-router wireless-access-point
edited Sep 17 '18 at 18:14
Hennes
59.2k792142
59.2k792142
asked Apr 2 '14 at 4:06
mah.crmah.cr
10112
10112
add a comment |
add a comment |
4 Answers
4
active
oldest
votes
Most wifi-routers can be used as just an access-point. (Not all. You will have to try to see if yours can do it.)
Basically you connect 1 of the LAN ports of the E2500 to a LAN port of the Belkin.
Leave the WAN/uplink port of the E2500 NOT connected.
In the E2500 you have to disable DHCP because the Belkin is already handling that. And for various reasons (DNS mainly) with consumer-equipment in most cases that is best done by the internet-facing router.
Configure the WIFI of the E2500 as usual.
If the Belkin also has Wifi it is probable best to have them BOTH setup for the same SSID and same password and configure them both to use the same channel(s). That way your client-devices will automatically pick the one with the strongest signal and will mostly smoothly roam from one AP to the other when you move through the building.
Please note: In some equipment you can't disable DHCP, or the device won't work if the WAN connection is not used. In that case you will have to daisy-chain like Moses proposed in his answer.
It is generally preferable to configure them on different channels. Devices will still automatically pick the strongest signal and smoothly roam.
– David Schwartz
39 mins ago
add a comment |
Yes, it would be very simple.
Simply plug an ethernet cable from a LAN port on your Belkin ADSL router to the WAN (Internet) port on the E2500.
The default settings for WAN/LAN should be fine on the router, and all you need to do is set up the WiFi.
You should configure a static LAN IP address in the router. That address should be inside the other router's LAN range but outside its DHCP range. So, for example, if the LAN is 192.168.1.0/24, the other router's LAN IP address is 192.168.1.1, and the other router's DHCP range is .100 to .200, then you could configure 192.168.1.2 as the router's LAN IP address. You could then access it using that IP address.
– David Schwartz
37 mins ago
add a comment |
Is it something like this that you want to achieve?
On the second router if you setup DHCP but for the gateway put in the first routers IP address. And for the second router the IP address should be assigned statically with the first router as the gateway. That should work
add a comment |
I tuned off DHCP, plugged it in as Tonny suggested and it worked. But now I can't get back to the web page of the E250. What if I want to change my E250 password, for example?
New contributor
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f736605%2flinksys-e2500-works-as-access-point%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
4 Answers
4
active
oldest
votes
4 Answers
4
active
oldest
votes
active
oldest
votes
active
oldest
votes
Most wifi-routers can be used as just an access-point. (Not all. You will have to try to see if yours can do it.)
Basically you connect 1 of the LAN ports of the E2500 to a LAN port of the Belkin.
Leave the WAN/uplink port of the E2500 NOT connected.
In the E2500 you have to disable DHCP because the Belkin is already handling that. And for various reasons (DNS mainly) with consumer-equipment in most cases that is best done by the internet-facing router.
Configure the WIFI of the E2500 as usual.
If the Belkin also has Wifi it is probable best to have them BOTH setup for the same SSID and same password and configure them both to use the same channel(s). That way your client-devices will automatically pick the one with the strongest signal and will mostly smoothly roam from one AP to the other when you move through the building.
Please note: In some equipment you can't disable DHCP, or the device won't work if the WAN connection is not used. In that case you will have to daisy-chain like Moses proposed in his answer.
It is generally preferable to configure them on different channels. Devices will still automatically pick the strongest signal and smoothly roam.
– David Schwartz
39 mins ago
add a comment |
Most wifi-routers can be used as just an access-point. (Not all. You will have to try to see if yours can do it.)
Basically you connect 1 of the LAN ports of the E2500 to a LAN port of the Belkin.
Leave the WAN/uplink port of the E2500 NOT connected.
In the E2500 you have to disable DHCP because the Belkin is already handling that. And for various reasons (DNS mainly) with consumer-equipment in most cases that is best done by the internet-facing router.
Configure the WIFI of the E2500 as usual.
If the Belkin also has Wifi it is probable best to have them BOTH setup for the same SSID and same password and configure them both to use the same channel(s). That way your client-devices will automatically pick the one with the strongest signal and will mostly smoothly roam from one AP to the other when you move through the building.
Please note: In some equipment you can't disable DHCP, or the device won't work if the WAN connection is not used. In that case you will have to daisy-chain like Moses proposed in his answer.
It is generally preferable to configure them on different channels. Devices will still automatically pick the strongest signal and smoothly roam.
– David Schwartz
39 mins ago
add a comment |
Most wifi-routers can be used as just an access-point. (Not all. You will have to try to see if yours can do it.)
Basically you connect 1 of the LAN ports of the E2500 to a LAN port of the Belkin.
Leave the WAN/uplink port of the E2500 NOT connected.
In the E2500 you have to disable DHCP because the Belkin is already handling that. And for various reasons (DNS mainly) with consumer-equipment in most cases that is best done by the internet-facing router.
Configure the WIFI of the E2500 as usual.
If the Belkin also has Wifi it is probable best to have them BOTH setup for the same SSID and same password and configure them both to use the same channel(s). That way your client-devices will automatically pick the one with the strongest signal and will mostly smoothly roam from one AP to the other when you move through the building.
Please note: In some equipment you can't disable DHCP, or the device won't work if the WAN connection is not used. In that case you will have to daisy-chain like Moses proposed in his answer.
Most wifi-routers can be used as just an access-point. (Not all. You will have to try to see if yours can do it.)
Basically you connect 1 of the LAN ports of the E2500 to a LAN port of the Belkin.
Leave the WAN/uplink port of the E2500 NOT connected.
In the E2500 you have to disable DHCP because the Belkin is already handling that. And for various reasons (DNS mainly) with consumer-equipment in most cases that is best done by the internet-facing router.
Configure the WIFI of the E2500 as usual.
If the Belkin also has Wifi it is probable best to have them BOTH setup for the same SSID and same password and configure them both to use the same channel(s). That way your client-devices will automatically pick the one with the strongest signal and will mostly smoothly roam from one AP to the other when you move through the building.
Please note: In some equipment you can't disable DHCP, or the device won't work if the WAN connection is not used. In that case you will have to daisy-chain like Moses proposed in his answer.
answered Apr 2 '14 at 13:45
TonnyTonny
17.2k33454
17.2k33454
It is generally preferable to configure them on different channels. Devices will still automatically pick the strongest signal and smoothly roam.
– David Schwartz
39 mins ago
add a comment |
It is generally preferable to configure them on different channels. Devices will still automatically pick the strongest signal and smoothly roam.
– David Schwartz
39 mins ago
It is generally preferable to configure them on different channels. Devices will still automatically pick the strongest signal and smoothly roam.
– David Schwartz
39 mins ago
It is generally preferable to configure them on different channels. Devices will still automatically pick the strongest signal and smoothly roam.
– David Schwartz
39 mins ago
add a comment |
Yes, it would be very simple.
Simply plug an ethernet cable from a LAN port on your Belkin ADSL router to the WAN (Internet) port on the E2500.
The default settings for WAN/LAN should be fine on the router, and all you need to do is set up the WiFi.
You should configure a static LAN IP address in the router. That address should be inside the other router's LAN range but outside its DHCP range. So, for example, if the LAN is 192.168.1.0/24, the other router's LAN IP address is 192.168.1.1, and the other router's DHCP range is .100 to .200, then you could configure 192.168.1.2 as the router's LAN IP address. You could then access it using that IP address.
– David Schwartz
37 mins ago
add a comment |
Yes, it would be very simple.
Simply plug an ethernet cable from a LAN port on your Belkin ADSL router to the WAN (Internet) port on the E2500.
The default settings for WAN/LAN should be fine on the router, and all you need to do is set up the WiFi.
You should configure a static LAN IP address in the router. That address should be inside the other router's LAN range but outside its DHCP range. So, for example, if the LAN is 192.168.1.0/24, the other router's LAN IP address is 192.168.1.1, and the other router's DHCP range is .100 to .200, then you could configure 192.168.1.2 as the router's LAN IP address. You could then access it using that IP address.
– David Schwartz
37 mins ago
add a comment |
Yes, it would be very simple.
Simply plug an ethernet cable from a LAN port on your Belkin ADSL router to the WAN (Internet) port on the E2500.
The default settings for WAN/LAN should be fine on the router, and all you need to do is set up the WiFi.
Yes, it would be very simple.
Simply plug an ethernet cable from a LAN port on your Belkin ADSL router to the WAN (Internet) port on the E2500.
The default settings for WAN/LAN should be fine on the router, and all you need to do is set up the WiFi.
answered Apr 2 '14 at 13:34
MosesMoses
9,1262159107
9,1262159107
You should configure a static LAN IP address in the router. That address should be inside the other router's LAN range but outside its DHCP range. So, for example, if the LAN is 192.168.1.0/24, the other router's LAN IP address is 192.168.1.1, and the other router's DHCP range is .100 to .200, then you could configure 192.168.1.2 as the router's LAN IP address. You could then access it using that IP address.
– David Schwartz
37 mins ago
add a comment |
You should configure a static LAN IP address in the router. That address should be inside the other router's LAN range but outside its DHCP range. So, for example, if the LAN is 192.168.1.0/24, the other router's LAN IP address is 192.168.1.1, and the other router's DHCP range is .100 to .200, then you could configure 192.168.1.2 as the router's LAN IP address. You could then access it using that IP address.
– David Schwartz
37 mins ago
You should configure a static LAN IP address in the router. That address should be inside the other router's LAN range but outside its DHCP range. So, for example, if the LAN is 192.168.1.0/24, the other router's LAN IP address is 192.168.1.1, and the other router's DHCP range is .100 to .200, then you could configure 192.168.1.2 as the router's LAN IP address. You could then access it using that IP address.
– David Schwartz
37 mins ago
You should configure a static LAN IP address in the router. That address should be inside the other router's LAN range but outside its DHCP range. So, for example, if the LAN is 192.168.1.0/24, the other router's LAN IP address is 192.168.1.1, and the other router's DHCP range is .100 to .200, then you could configure 192.168.1.2 as the router's LAN IP address. You could then access it using that IP address.
– David Schwartz
37 mins ago
add a comment |
Is it something like this that you want to achieve?
On the second router if you setup DHCP but for the gateway put in the first routers IP address. And for the second router the IP address should be assigned statically with the first router as the gateway. That should work
add a comment |
Is it something like this that you want to achieve?
On the second router if you setup DHCP but for the gateway put in the first routers IP address. And for the second router the IP address should be assigned statically with the first router as the gateway. That should work
add a comment |
Is it something like this that you want to achieve?
On the second router if you setup DHCP but for the gateway put in the first routers IP address. And for the second router the IP address should be assigned statically with the first router as the gateway. That should work
Is it something like this that you want to achieve?
On the second router if you setup DHCP but for the gateway put in the first routers IP address. And for the second router the IP address should be assigned statically with the first router as the gateway. That should work
answered Sep 21 '15 at 5:58
TheNerdyNerdTheNerdyNerd
36825
36825
add a comment |
add a comment |
I tuned off DHCP, plugged it in as Tonny suggested and it worked. But now I can't get back to the web page of the E250. What if I want to change my E250 password, for example?
New contributor
add a comment |
I tuned off DHCP, plugged it in as Tonny suggested and it worked. But now I can't get back to the web page of the E250. What if I want to change my E250 password, for example?
New contributor
add a comment |
I tuned off DHCP, plugged it in as Tonny suggested and it worked. But now I can't get back to the web page of the E250. What if I want to change my E250 password, for example?
New contributor
I tuned off DHCP, plugged it in as Tonny suggested and it worked. But now I can't get back to the web page of the E250. What if I want to change my E250 password, for example?
New contributor
New contributor
answered 45 mins ago
RonopolisRonopolis
11
11
New contributor
New contributor
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f736605%2flinksys-e2500-works-as-access-point%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown